# psi to lbs

6894.757. poundal per square foot.

1 psi = 0.001 ksi 1 ksi = 1000 psi.

User Manuals 98,125 lbf is a hard number to show on a four-digit display, so you (or, in this instance, our motorcycle manufacturing friends) will want to scale that reading to a larger unit of measure like tons for example. 19.625 square inches at 5000 psi (19.625 X 5000) equals 98,125 lbs. Psi : Psi is the abbreviation of pound per square inch, and is widely used in British and American.

To convert this to tons, we will divide 98,125by 2000 lbs, or one ton, to get 49 tons. 133.3224. It is the pressure resulting from a force of one pound-force applied to an area of one square inch. 19.625 square inches at 5000 psi (19.625 X 5000) equals 98,125 lbs.

Popular Pressure Unit Conversions pressure sensors. Vendor Compliance Manual, Automation Products Group, Inc. So we multiply π (3.14) by 6.25 inches (radius of 2.5 inches squared) to get 19.625 square inches as illustrated below. To convert PSI to lbs, APG Sensors’ digital pressure gauges should be set up to use the "Custom Units of Measure" function, which will allow the sensor to read in pounds.

Pounds per square inch (psi or pfsi) are American and British Imperial units and the value is the same in both measurement systems. The formula for this is: Area = pi X radius squared.

pascal. Step 10: Press Zero to scroll until you see EXIT, and press Select to return to the main display. When not provided, the area will need to be calculated. Terms & Conditions It is widely used in British and American.

pascal. 95760.518. torr.

Therefore, 1 atmosphere is approximately 14.696 pounds per square inch. 1.488164. short ton per square foot. Lbs of force, however, is not a unit of pressure displayed by our gauge; therefore, the custom unit converter function that is built into all of our gauges needed to be used. Privacy & Cookie Policy Install Guides

1 x 1 PSI lbf/in2 = 1 Pound Force Per Square Inch. Step 3: Press the Select button to access the Units setting options.

How to Convert Psi to Ksi. To determine the scale factor for tons, we convert the full-scale psi (pounds of force per square inch) to full-scale pounds. Once you know the multiplier, APG’s digital pressure gauges make converting PSI to LBS easy! Inside the car door, the tyre pressure front and back is listed as 220. what pressure would this convert to in the UK? Here are steps to program the multiplier into the gauge: Step 1: Press the On/Off button once to enter the main setup menu.

1 psi = 6,894.76 Pascals. To get the multiplier that you'll enter into the gauge to display tons, divide the tons calculated above (49) by the psi full scale (5000). Step 4: Press Zero to cycle through the Units options until CUSTOM is displayed.

To convert PSI to lbs, simply multiply the pressure by the area over which the force is applied.

Blog Step 7: Press the Select button to accept the flashing digit and advance to the next digit. bar: Metric, 100,000 Pa; kPa: SI, Metric, 1,000 Pa; psi: American, British Imperial, 6,894.76 Pa; 220 car tyre pressure meaning.

To convert this to tons, we will divide 98,125by 2000 lbs, or one ton, to get 49 tons. Step 8 After the last digit is accepted by pressing Select, use the Zero button to scroll through the custom units of measure; LBF, KN, LBS, KG, and NEWTON. The equations below illustrate this. FAQ, Contact Us pound per square inch. 1 psi = 6,894.76 Pascals. torr. Careers, ISO 9001:2015 Certification Psi : Psi is the abbreviation of pound per square inch, and is widely used in British and American. lb/in 2 or psi. About Us Convert lbs to tons: To determine the scale factor for tons, we convert the full-scale psi (pounds of force per square inch) to full-scale pounds. 1025 W 1700 N Logan, UT 84321Phone: (877) 373-5940Fax: (435) 753-7300 To do this, we multiple the maximum PSI of the digital pressure gauge by the previously calculated area. sh tn/ft 2. pascal. Pound/Square Inch : Pounds or pound force per square inch (symbol: psi, lb/in², pfsi or lbf/in²) is a unit of measure for pressure based on avoirdupois units. psi↔pa 1 psi = 6894.744825 pa psi↔kPa 1 psi = 6.894745 kPa psi↔cPa 1 psi = 689474.482549 cPa psi↔mPa 1 psi = 6894744.825494 mPa psi↔uPa 1 psi = 6894744825.494 uPa psi↔N/m2 1 psi = 6894.744825 N/m2 psi↔Bar 1 Bar = 14.5038 psi psi↔mbar 1 psi = 68.947448 mbar psi↔ubar 1 psi = 68947.448255 ubar psi↔kgf/m2 1 psi = 703.068306 kgf/m2 Pound/Square Inch : Pounds or pound force per square inch (symbol: psi, lb/in², pfsi or lbf/in²) is a unit of measure for pressure based on avoirdupois units. As always, let our Measurement Experts know if you have any questions about how to calculate your custom multiplier. COPYRIGHT © 2020 Automation Products Group, Inc. How To Calculate the PSI to LBS Multiplier for an APG Gauge.

You can now move on to the programming steps.

It is widely used in British and American. Step 5: Press Select to access the Custom Units setting. In a hydraulic system, it is often beneficial to not only display the pressure in the system but to also display the force being exerted by a hydraulic ram.

Once you know the multiplier, APG's digital pressure gauges make converting PSI to LBS easy!

This could be simply to display the actual force being exerted by a hydraulic ram in a familiar format. Years ago, a motorcycle design and manufacturing company approached us about using one of our 5000 psiPG7 Digital Pressure Gauges to measure lbs of force from a hydraulic ram. The principle behind the process is a simple conversion from one unit to another; in this case the APG digital pressure gauge can convert PSI to lbs. Tradeshows References/ Further Reading. So, when our hydraulic ram is pressing down to full-scale measurement on our 5000 psi gauge, we want it to display 49 tons. In our example with the motorcycle company, we would multiply the maximum output of the PG7 (5000 PSI) by the area of the hydraulic ram (19.625) to get 98,125 lbf, illustration below. PSI is a unit of measure for pressure, and pressure (PSI) is the amount of force (lbf) applied per unit of area (in2). 1 psi = 6,894.76 Pascals. Always check the results; rounding errors may occur.

0 replies